ORMO Travel

Three LED lights on the external walls of the camper illuminate the area around the module during nighttime.

Two external boxes can be used to store camping furniture or any other large travel gear. The boxes come with locks for security.

Available in four colors, coated with Raptor (a two-component polyurethane protective coating). This provides high strength and abrasion resistance.

At the customer's request, we can install one or two external boxes for storing items and gear.

The camper can be painted in a custom color chosen by the customer. Additionally, custom design and decorative graphics can be applied based on customer preferences.

The camper can be equipped with a fan awning of our production. The awning provides an additional shaded and rain-protected area for relaxation or cooking next to the camper. Width: 230 cm, Opening Angle: 270°.

A foldable screen provides privacy for taking a shower in warm weather. The showerhead is a retractable kitchen faucet. The screen can also be used for setting up a toilet.

Additional lighting is especially useful for off-road driving (800 mm 180 W LED bar).

We can install one or two expedition fuel canisters on the rear of the camper.

We make mounts for shovels that are fixed to the expedition canister, ensuring the shovel is always easily accessible.

For transporting bicycles, we can manufacture a bracket for bicycle mounts. The bracket is hinged, allowing access to the camper without removing the bikes.

We can manufacture mounts for motorcycles, spare wheels, or any other heavy and bulky gear.

For screwing on or inserting on residential modules, the airline rails with various additional modules offer you very individual mounting / equipment options. It is anodized aluminum and thus protected from rust.

The Travel series camper is equipped with an insulated bathroom featuring a shower and space for a portable toilet. This allows you to take a warm shower and perform hygiene procedures inside the camper.

The fully Pop-Up roof increases interior space and adds extra volume to the alcove area, allowing you to sleep with your head toward the cab without needing to turn around before bed.

The 400x400 mm isothermal hatch is equipped with a mosquito net, sunshade, and a two-stage ventilation system to maintain a comfortable climate inside the module.

Equipped with a sink and faucet, as well as a system of pull-out drawers for storing food and dishes. The retractable kitchen faucet can also be used for showering.

A cozy dining area with a dining table and two soft sofas. It can accommodate 3-4 adults and can be converted into additional sleeping space if needed.

The main sleeping area is located in the over-cab section. When unfolded, it measures 170x200 cm.

The camper is equipped with spacious compartments and drawers for storing items and gear.

We can provide textile pockets for additional storage of small items, helping you organize and maintain order in the camper.

An LED light fixture is installed on the ceiling of the camper.

In addition to the main ceiling light, each camper is equipped with an LED strip around the perimeter of the ceiling. Its soft, warm light creates a cozy atmosphere inside the module in the evening.

The kitchen work surface allows for the installation of a built-in gas stove. There are models of gas stoves combined with a sink and faucet.

A small compressor refrigerator allows you to take familiar food on trips. A special platform is provided in the camper for its installation.

We can manufacture an additional closet for storing items at the camper's entrance. It is installed on the platform intended for the refrigerator (instead of the refrigerator).

For greater convenience and efficient organization of internal spaces, we can make organizers and bags that fit perfectly into the compartments and drawers of your camper.

For added convenience, we offer the installation of a portable toilet in the camper.

The basic configuration of the camper includes several textile wall organizers, but if necessary, we can make additional ones.

Small lamp on a flexible basis for reading books.

 A gel-based battery is installed as standard. This battery is resistant to deep discharges and has an extended lifespan.

 This system allows charging the camper's battery while driving via a special relay from the vehicle's alternator.

Enables the camper's battery to be recharged using solar energy.

An MPPT controller ensures the camper's battery is charged from the solar panel.

Energy system control switches are conveniently located on a single panel, which also houses USB sockets, a water level sensor, heater control, voltmeter, and more.

For safety, the electrical system is equipped with fuses and a circuit breaker to protect both the electrical equipment and wiring.

As an alternative to a gel battery, we can offer a lithium-iron-phosphate battery. It has a higher energy density and longer operational life, and such batteries are on average 20 kg lighter than gel batteries.

Allows connection to an external power source, which is useful, for example, in equipped campsites.

Adds autonomy to your electrical system: the camper battery will recharge faster from solar energy.

Converts voltage from 12V to 220V, allowing the use of electrical appliances requiring 220V.

The 2 kW air heater warms the air in the camper during cold weather, ensuring comfort even at subzero temperatures.

Each module is equipped with supply ventilation, while the hatch and windows in ventilation mode provide exhaust ventilation. This system ensures air circulation and a comfortable microclimate inside the camper. The supply valve is located in the lower part of the module.

The main water tank supplies water to the kitchen faucet. It is located in the podium under the dining area, above the vehicle's rear axle.

The indicator allows you to monitor the water level in the main tank.

The pump is necessary to supply water from the main tank to the kitchen faucet.

The winter package allows the module to be used in winter. It includes an insulated tent, heating of the main water tank, heater distribution throughout the cabin, and warm air supply to the over-cab section.

As an option, an electric boiler with a capacity of 6 liters can be installed, providing hot water for activities such as showering. Parameters: (12V/250W, 220V/500W).

An external faucet hatch can be placed on the camper's outer wall. This solution simplifies showering and is convenient during long stops: you can wash dishes, fruits, or hands without entering the camper.

The camper can be equipped with a 25-liter grey water tank. You can switch the drain depending on the situation. For example, in the city, drain water into the grey water tank, and in nature, drain it directly under the vehicle.

Includes jacks for removal/installation, a set of bolts, a wrench, a mounting frame for the bed, and a wiring kit.

A wheeled cart is used for moving the camper, for example, in a garage or parking lot. The module can be stored on it.